HDTV Lounge

Canon and Toshiba and their joint venture SED Inc have been showing off their a 55-inch SED panel at the “FPD International 2006″ in Pacifico Yokohama convention center. It is a so-called “full HD” panel featuring 1920 x 1080p resolution as with the one showcased at the “CEATEC JAPAN 2006.”

The contrast ratio is reported to be 100000:1, while that of the model presented at the CEATEC JAPAN 2006 was 50000:1. “The performance improves day by day. Read more

The first SED HDTVs which have been displayed at the CEATEC 2006 show will be released in near the end of 2007 and should be ready for mass production in the first quarter of 08.
The first SED to be released should be the 1080p 55-inch model as shown here. The 55-inch SED will have a very impressive 50,000:1 contrast ration (much better than any current LCD or Plasma display) 450 nits of brightness, and a lightning fast response time of just 1ms.

Canon and Toshiba are joining forces and investing $200 billion into developing and producing a new flat screen technology called surface-conduction electron-emitter display, also known as SED which will be even slimmer than LCD and Plasma HDTVs.

SED TVs will of course be HDTV and should be ready for the public in early 2008. Many manufactures are entering the TV market as they expect this market to boom in the next few years as the trend to digital transition grows. Read more

SED, a technology developed by Canon and Toshiba is set to be the next big thing after Plasma and LCD. Developed jointly by Canon and Toshiba, SED stands for Surface-conduction Electron-emitter Display. It is cheaper to produce than Plasma or LCD and delivers better picture quality.

SED technology works much like a traditional CRT except instead of one large electron gun firing at all the screen phosphors that light up to create the image you see, SED has thousands of tiny electron guns known as “emitters” for each phosphor sub-pixel. A sub-pixel is just one of the three colours (red, green, blue) that make up a pixel. So it takes three emitters to create one pixel on the screen and over 6 million SED emitters to produce a true high definition (HDTV) image. One prototype has even attained a contrast ratio of 100,000:1. Its brightness of 400cd/m2 is a tad on the low side for an LCD TV and nowhere close to a plasma screen output.

Canon first started development on this imaging technique back in the mid 1980s and joined up with Toshiba for the project in 1999. Both formed a dedicated company for the technology called SED Inc. in 2004.

Neither of these companies is a notable player in the flat screen arena, but they are looking to make a big splash with SED TV. Test production runs are already underway with limited product availability expected by late 2006 in the US and Japanese markets. At present, it looks as if Toshiba will start manufacturing HDTV panels in earnest in 2007 barring any production problems. Entry level models are set to be 50″ inches with top end models set to go to 100″ inches. The technology is cheaper to produce than LCD or Plasma with some analysts saying that 55″ SED screens will eventually sell for $1,000 or less.

Research shows that SED TVs will last a long time. Tests reveal that that the electron emitters have been shown to only drop 10% after 60,000 hours, simulated by an “accelerated” test. This means that it is likely the unit will keep working as long as the phosphors continue to emit light.

SED is flat. A traditional CRT has one electron gun that scans side to side and from top to bottom by being deflected by an electromagnet or “yoke”. This has meant that the gun has had to be set back far enough to target the complete screen area and, well, it starts to get ridiculously large and heavy around 36″. CRTs are typically as wide as they are deep. They need to be built like this or else the screen would need to be curved too severely for viewing. Not so with SED, where you supposedly get all the advantages of a CRT display but need only a few inches of thickness to do it in. Screen size can be made as large as the manufacturer dares. Also, CRTs can have image challenges around the far edges of the picture tube, which is a non-issue for SED.
Source & More: http://www.smarthouse.com.au/